產品品牌：大菱 產品型號：DL330 詳細說明

1、 采用片式及不銹鋼螺旋和齒分段旋轉型的混合頭裝置，使料液攪拌更均勻、出料快并且流暢：攪拌轉速n=8800轉/分（8800-12000轉/分由變頻器進行調速），使二組料得到充分混合均勻，制作出制品致密、彈性好、手感好。配上制冷裝置，連續工作時間長，減少混合頭清洗次數，節省清洗液（約20-30克/次），減輕環境污染、降低生產成本、提高競爭力。2、 澆注機澆注量由電腦控制，可隨時切換不同顏色、不同密度的聚氨酯制品。延長設備的使用壽命，減少了澆注頭清洗周期，改善制品質量，提高生產效率?？蚴骄郯滨ピ侯A熱烘箱：生產聚氨酯制品前應將A、B兩種原液送進烘箱內進行60℃-70℃預熱。預熱溫度時間應參照生產原液不同供應商所提供的使用說明書要求進行設定。1.The equipment adopts stainless steel screw and tooth piecewise mixing head to mix the raw material more quickly and pour the raw material into the shoe mould more glidingly. The stirring speed is 8800 rad/min （the speed limits 8800 to 12000 rad/min with inverter.）and it mix the two groups of raw material evenly and fully. The products are dense and elastic.The equipment can work longer and cleaned less for saving clean liquid (about 20-30g everytime) with the refrigerating device that make it get a an advantage of environmental protection, low cost and high competitiveness.2.The pouring amount is controlled by microcomputer. It can switch different color and density polyurethane products at any time.We have prolonged the service life of equipment, reduced the cleaning cycle of mix pour head, improved the quality of products and the production efficiency.The frame type preheat oven to the polyurethane :Pour the “A” and ”B” raw materials into the preheat oven to preheat at 60-70℃。The preheating time should according to different materials of different suppliers’ instructions.